Download Samsung Galaxy S3 Software for Mac Updated

Linda Frawing1999 – April 19, 2022

Download Samsung Galaxy S3 Software for Mac

Subsequently the leaks and official updates on Galaxy S4 (I9500 and I9505) and S3 (I9300), the Android 4.iii Update by Samsung for the Galaxy S3, model no. GT-I9300, has become available — I9300XXUGMJ9 is the build no.

This is leak firmware. And only a test build. information technology's working good only non perfect — there may be (read: are) bugs nowadays which should exist fixed by Samsung upon final official update, which may happen in coming weeks. that said, information technology's been under testing for some time now, and is said to exist working all overnice.

So, if y'all can expect for few weeks for Samsung to release the full and final official Android four.3 Jelly Edible bean update for the Galaxy S3, you may look. but if you can't await, only keep reading on equally we encounter a detailed step-by-step guide on how to download and wink the I9300XXUGMJ9 Android 4.three Update on the Galaxy S3.

And FYI, Samsung never brought the Android four.2 version to Galaxy S3, to it's one first of its kind huge update for the Milky way S3 users, whose device came pre-installed with Android 4.one, never saw Android 4.two, and is in the front line to get Android 4.three.

About the KNOX on Galaxy S3

KNOX is Samsung's advanced software for additional security that lest you lot encrypt data on your phone – -you choose to encrypt the business use of your phone while keeping open personal use and so.

KNOX, in plain words is, bad. It will void your warranty upon detecting a not-Samsung-approved alter to cadre files of you phones, which is exactly what is done while rooting a device. So, KNOX hates root, and thus, we hate KNOX.

Because, rooting on a phone with KNOX installed, voids the warranty of the device. Upon first boot after root, KNOX gets triggered on reading the unauthorized code and marks warranty equally 0x1, which means void. And, Warranty 0x0 is what is by default and likewise what you lot desire.

Now, KNOX isn't nowadays in this text build of Android iv.3 update for the Galaxy S3, which is great — you have one proficient Android 4.iii based firmware from Samsung without KNOX! But, we fully expect Samsung to mix KNOX in last builds of Android 4.3 for the Galaxy S3.

That said and learned, let'south meet how to install Android 4.three on Galaxy S3 using the leaked firmware, I9300XXUGMJ9.

WARNING!

Warranty may exist void of your device if you follow the procedures given on this page!

Y'all only are responsible for your device. We won't be liable if whatever damage occurs to your device and/or its components.

Bank check DEVICE MODEL NO.

To make sure your device is eligible with this, you must showtime confirm its model no. in 'Near device' option nether Settings. Another way to confirm model no. is past looking for it on the packaging box of your device. It must be GT-I9300!

Please know that this page is meant only for Samsung Milky way S3 international variant, model no. GT-I9300!. Please DO NOT try the procedures given here on other variants of the Galaxy S3, including those S3 sets at AT&T, Verizon, T-Mobile, Sprint and other variants who take different model no.

BEFORE You lot BEGIN..

You must do this pre-installation stuff earlier attempting to install this KNOX-costless Android 4.3 update on your Milky way S3 GT-I9300 in lodge to avoid any complications later, and have a shine and successful process.

Back up YOUR DEVICE

Support important data and stuff before you start playing around hither as there are chances you might lose your apps and app-information (app settings, game progress, etc.), and in rare case, files on sd carte, too.

For help on Fill-in and Restore, check out our exclusive page on that linked right below.

► ANDROID Support AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY S3 Commuter

Y'all must take proper and working commuter installed on your windows computer to be able to successfully flash KNOX-costless Android 4.3 firmware international Samsung Galaxy S3 GT-I9300. In instance you're not sure, follow the link below for a definitive guide for installing driver for your Milky way S3 on your computer.

► SAMSUNG GALAXY S3 DRIVER INSTALLATION GUIDE

Accuse YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the procedure is underway, it could damage the device. So, make sure both of them are adequately charged and that no power intermission takes place when the procedure is undergoing — at least fifty% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE Intendance OF:

└ Use original USB cable to connect your phone to PC.

└ Practice non utilize the procedures given below on Mac (using VMWare) as information technology works best on proper Windows PC only.

Case VIDEO

If you oasis't used Odin software to install a firmware on your device earlier, we propose you lot first sentinel a video of that, given right below, to get familiar with the process.

Btw, the video below features installation of TWRP recovery on Galaxy S3 using odin. Merely as the procedure is exactly same, information technology doesn't matter.

INSTALL ANDROID 4.3 UPDATE I9300XXUGMJ9 ON SAMSUNG Milky way S3

NOTE: Go along in listen that the following process will flash just a KNOX-disabled firmware. And it is Non rooted.

Make certain you've backed up you're device before proceeding.

DOWNLOADS

Download the files given below and save them in a separate folder on your computer (just to go on things tidy, that is).

Odin: DOWNLOAD LINK
File proper name: Odin3.09.nada
Android four.3 Firmware I9300XXUGMJ9
DOWNLOAD LINK | MIRROR 1 | MIRROR two
Fille name:I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_VFG.cipher

STEP-BY-Pace GUIDE

In one case y'all've finished downloading the file given in downloads section above, follow the instructions beneath for flashing Android 4.3 firmware on your Samsung Milky way S3 GT-I9300.

Important Note: Fill-in important files stored on internal SD menu of your device, then that in instance a situation arises requiring you lot to do a factory reset after installing the firmware, which might delete internal sd carte du jour too, your files will remain safe on PC.

Excerpt/Unzip the Odin3.09.null file on your estimator (using 7-zip free software, preferably) to become this file: Odin3 v3.09.exe
Excerpt/Unzip I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_VFG.zip file on your estimator now to get these files:
- AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5
- Add BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5
- Add MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5
- Add CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.tar.md5
Disconnect the Galaxy S3 from PC if it is connected.
Double-click the Odin3 v3.09.exe file to open Odin.
Boot your Milky way S3 GT-I9300 into Download Mode (the paradigm beneath of the Galaxy Notation 2 would assistance):
1. Ability off your phone outset and await for vi-7 seconds subsequently display is off.
2. Press and concord these three buttons together until you see Alarm! screen: Book Downwards + Power + Home.
3. Press Volume Up now to continue to Download Manner.
Connect Galaxy S3 to PC. Odin window will show an Added!! message in bottom left box.
Odin's screen would look similar this:

└ If you don't go the Added! message, then make certain you installed commuter as given above, if yep, so uninstall and re-install driver again.
Also, try another USB port on your PC and make sure you employ proficient quality cablevision, preferably that came with the phone. Reboot phone and PC and try again.
Load the file sinto Odin now:
- Click on the APbutton on Odin and select the AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
- Click on the BL button on Odin and select the BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 file
- Click on the CP button on Odin and select the MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5 file
- Click on the CSC button on Odin and select the CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.tar.md5 file
Click the Start button to begin flashing the Android 4.3 firmware on your International Galaxy S3 GT-I9300, and await until yous meet a Pass! message in Odin's top left box.
When you get Laissez passer! bulletin, your phone will restart automatically. You can so disconnect your telephone from PC.

If you see Neglect message instead of the PASS in Odin'due south top left box, that a problem. Endeavor this now: disconnect your S3 from PC, close Odin, remove telephone's battery and put it back inside in 3-4 seconds, open up Odin and then echo from Footstep 3 of this guide again.Also, If device is Stuck at setup connection or on any other process, and then too, effort this: disconnect your S3 from PC, shut Odin, remove phone's bombardment and put it back inside in 3-four seconds, open Odin and so repeat from Pace three of this guide again.

Congratulations! You have successfully flashed the KNOX-disabled firmware on your S3.

That'due south all. If you need help regarding this, feel complimentary to ask u.s.a. in comments below.

Feedback United states!

Information technology was easy, right? Let us know what y'all plan to do now, with root admission gained.

Suggestions are most welcomed!

Via XDA